PEEK Injection Molding

The matters of PEEK injection molding

The peek material can be processed by injection molding. PEEK is a high-temperature special engineering plastic and needs to be maintained at about 350 degrees. This requires that the heating section of the injection molding machine barrel can continuously and stably provide a heating temperature of more than 350 degrees. The melting temperature of peek material at high temperature is relatively high, and the viscosity in the molten state is relatively large, which requires higher pressure during injection molding and greater wear on the screw. In addition, peek injection molding requires heating, which is different from ordinary injection molding. 

It is best to find a manufacturer specializing in peek injection molding to avoid certain technical risks.Such as Deep Mould,we have the rich experience of PEEK part injection and mold making.

PEEK processing, PEEK has excellent machining performance, whether it is conventional turning, milling, but also suitable for grinding, gear hobbing, welding and other processes.

However, when peek injection molding, Ren needs to pay attention to the following issues:

1. When processing modified PEEK grades, it is necessary to pay attention to the wear of the tool;

2. When grinding, it is necessary to pay attention to the cooling of the grinding wheel;

3. When milling, it is necessary to pay attention to the processing deformation caused by excessive removal of material;

4. Although PEEK has good toughness and generally does not crack when tapping, it is necessary to prevent tapping chips from entangling.

• Contact Us

B Block,No 21,Nan Xing Three Street,Nan Fang Industrial Park,

Bei Ce,Humen,Dong Guan,Guang Dong,China.

info@deepmould.com

Skype: Deepmould

Tel/Wechat: 86-15024107707