🌞 Summer Injection Mold Maintenance Guide

 

🔥 Beat the Heat: Essential Strategies for Summer Injection Mold Tooling Care

 

Does your team have the same concern for the mold maintenance in the coming summer?

Deep Mould is professional at plastic molding industry and we have our own skills for your consideration.

 

With summer humidity often exceeding 70%, mold failure rates spike by 35%! 

 

1. Smart Temperature Management

Technical Breakthrough: Closed-loop temperature control with ±2℃ precision

Example: A 5°C overheat can reduce mold life by 20%.

 

2. 3-Layer Rust Prevention System

Preventive Measures:
✓ Nickel-plated cavity surfaces (salt spray resistance ≥1000 hours)
 

3. Lubrication Refresh

- Replace standard grease with high-temperature variants (rated for ≥150°C).

- Check moving parts (e.g., ejector pins/wear plates/bushings) daily for sticking.

 

4. Cleaning Venting

- Use ultrasonic cleaning for stubborn resin buildup.

- Inspect vents weekly-clogged vents reduce cycle efficiency by 15%.

 

5. Preventive Checks 

- Perform PMI (Preventive Maintenance Inspection) every 2000 cycles.

- Replace worn components (e.g., guide pins) before failures occur.

 

Why choose us?

10 years more experienced engineers team and well trained sales team to support every project.
 

More tips,please contact us!

 

B Block,No 21,Nan Xing Three Street,Nan Fang Industrial Park,

Bei Ce,Humen,Dong Guan,Guang Dong,China.

Email: info@deepmould.com

WhatsApp:+86-15024107707